Dig and Clean official Roblox artwork showing buried treasure and cleaning tools
Image: Dig & Clean on Roblox
Treasure Cleaning SimulatorBy Squeaky Clean!

Dig and Clean codes for August 2026

UPDATE3, UPDATE2, UPDATE1, and SECRET10 are the four Dig and Clean codes in the August 24 copy list. They give two 30-minute Luck boosts, five Instant Cleans, and a shorter 10x Luck boost.

Checked 2026-08-244 active codes checked

Update 3 is live with a new 30-minute 2x Luck code

Ready to copy

Active Dig & Clean codes

4 active codes · checked 2026-08-24

UPDATE3

2x Luck for 30 minutes

Checked2026-08-24
UPDATE2

5 Instant Cleans

Checked2026-08-24
UPDATE1

2x Luck for 30 minutes

Checked2026-08-24
SECRET10

10x Luck for 10 minutes

Checked2026-08-24

How to redeem Dig and Clean codes

Finish the opening tutorial, select Shop on the left side, and scroll to the Codes section at the bottom. Paste one string and press Redeem.

A successful claim shows a message and applies the reward immediately. Watch the Luck indicator or Instant Clean count after each entry so you know which code was accepted.

Use UPDATE2 on finds that slow the cleaning queue

UPDATE2 gives five Instant Cleans. Save those charges for finds that would interrupt the current route rather than spending them on the first easy object at the starting area.

The code reduces cleaning work; it does not replace the detector or digging steps needed to uncover an item.

Start Luck boosts only when you are ready to dig

UPDATE1 supplies a longer 2x Luck window, while SECRET10 supplies a shorter 10x window. Prepare the shovel, detector, destination, and inventory before redeeming either timed reward.

Use the ten-minute boost for a concentrated rare-find run. The longer boost is more forgiving when travel, cleaning, or museum sorting will interrupt the route.

Choose the right Luck timer before redeeming

UPDATE3 and UPDATE1 each provide a longer 2x Luck window. SECRET10 is much shorter but raises the multiplier to 10x, so it belongs in a prepared rare-find route rather than a menu-heavy session.

Redeem one timer, watch the HUD, and avoid assuming the boosts stack unless the live interface explicitly confirms it. Saving the next code protects its full duration.

Why a Dig and Clean code may fail

The code field stays unavailable until the tutorial is complete. After that, check spelling, remove copied spaces, and rejoin a current server once if the token arrived with a recent update.

Luck starts as soon as a successful timed code is applied. If the counter changed, do not submit the same string again; move into the prepared route before the timer runs down.

Quick answers

Dig & Clean codes FAQ

What are the working Dig and Clean codes?

UPDATE3, UPDATE2, UPDATE1, and SECRET10 are the four codes in the August 24 copy list.

Where is the Dig and Clean code box?

Complete the tutorial, open Shop from the left side, scroll to the bottom, and use the Codes section.

What does UPDATE2 give in Dig and Clean?

UPDATE2 gives five Instant Cleans for the cleaning part of the treasure loop.

What does UPDATE3 give in Dig and Clean?

UPDATE3 gives 2x Luck for 30 minutes in the August 24 review.